Parameter Reference Table for Common Plastics
Shenzhen, China
Published: Jul 3, 2026
Parameter Reference Table for Common Plastics
CO2 Laser Settings
| Plastic | Power (W) | Speed (mm/s) | Frequency (kHz) | Passes |
|---|---|---|---|---|
| PET (bottle) | 10–15 | 800–1,200 | 15–20 | 1 |
| PE (film) | 8–12 | 600–1,000 | 15–25 | 1 |
| PVC (sheet) | 12–20 | 500–900 | 15–20 | 1 |
| Acrylic (3mm) | 30–40 | 100–300 | 10–15 | 1 (for cutting) |
UV Laser Settings
| Plastic | Power (W) | Speed (mm/s) | Frequency (kHz) | Pulse Width (ns) |
|---|---|---|---|---|
| ABS | 5–8 | 300–600 | 30–50 | 5–15 |
| Polycarbonate | 4–7 | 200–500 | 25–45 | 5–15 |
| Nylon | 5–8 | 300–600 | 30–50 | 5–15 |
| PEEK | 6–10 | 200–400 | 30–60 | 5–20 |
| POM | 5–8 | 300–500 | 30–50 | 5–15 |
Note: These are starting points. Actual settings must be optimized for your specific material, part geometry, and desired mark appearance. Always test on scrap before production.
